Honey and nuts dosing machine in glass jars

Dosing machine for a very careful filling of honey and cream honey with nuts in glass jars sizes from 50 ml. up to 1.000 ml. This machine can dose quantities between 150 and 5.000 ml., without having to replace any mechanical part. For quantities below 150 ml. you simply need to insert a reduction unit (option).
 
Filler is disposed to be transformed in Duplex version in order to double hourly output.
Mechanical max. hourly output adjustable up to:
- 3.000 containers/hour sizes up to 1.200 ml.
- 1.500 containers/hour sizes from 1.300 up to 2.400 ml.
- 600 containers/hour sizes from 2.500 up to 5.000 ml.
 
If very liquid products are used, or product provoking foam formations during filling, the force of the jet must be reduced to prevent splashing or spilling from the container. Consequently, all hourly outputs will be reduced.
Production speed depends on: 
Product: physical characteristics, size, filling volume, liquidity, foam formation, splashing, spillage.
Containers: dimension and size, dimension of neck. 
Production speed must be adapted in consideration off all these factors.
DOSER’S OPTIONS:
• Divo-sphere for internal loading hopper’s cleaning. Cleaning water discharging pipe with CIP connection: 1.200,00 EUR
• Option for double thermo jacketed loading hopper (with temperature control and insulation): 2.800,00 EUR
• Reduction unit kit with piston for filling of sizes starting from 50 ml.: 1.300,00 EUR
• Remoting PLC teleservice Remoting PLC teleservice The machine is supplied with a module with an Ethernet interface, which allows it to be connected with the Manufacturer service, in order to perform software modifications and data acquisition. Client may need in the future, or diagnostics for quick troubleshooting: Included.
For the American market, depending on the machine model, we supply 220V-60Hz-1ph or 220V-60Hz-3ph electrical power.
 
Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.
 
Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.
 
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.
 
The check of electronic components is carried out by technical staff at our company office in Italy. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.
 
Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.
 
The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.
 
The following situations are not covered by the warranty:
Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.
 
VAT: not included
 
Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is $500,00 per day, plus transport and accommodation costs.
 
EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.
 
Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.
 
Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of Italy.
 
Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.
 
Manufacturer: Italy
 
Factory Price EXW: from 58.000,00 EUR