We are often asked the question, what is the minimum equipment to start a chocolate business? In major cities of the world, there are small shops behind glass that show their confectionery production at the highest level. This German equipment is just right for this purpose. The 120 mm enrobing machine has a capacity of 15 kg and will be supplied as a simple table top model. The standard model is equipped with a removable 1 meter outfeed conveyor to cool finished goods on paper. This is the minimum budget option for beginners.
Confectionery of all kinds and cakes up to about 5 cm high, as well as cream cheese, for example, can be coated with chocolate, fondant, powdered sugar or simply icing. The machine usually runs at a belt speed of 0.5 to 2 meters per minute, the belt speed is adjustable. The so-called cylinder, which is mounted at the end of the tape, prevents the formation of drips. All parts of the machine are designed to be very easy to clean and user friendly. Full modification is possible: bottom lighting, combination with the bottom part, lateral and partial extension. The exact temperature of the chocolate is controlled by an extremely sensitive digital one-tenth centigrade scale thermostat.
Heating is achieved by an integrated fully electronic air circulation system. Two thermostats allow you to use the standby mode and the operating mode. The belt, chocolate wheel and chocolate tank are easily interchangeable. The machines are supplied according to the specific needs of the client, either with an outfeed conveyor, special outfeed conveyors with a photo eye (stop and start for batch work) or with a cooling tunnel. In addition, special additional devices are available, such as truffle belts with additional heating, truffle tables for powders, vibrating tables and special belts for gingerbread. The whole machine is made of stainless steel.
Our coating machines provide the following benefits:
As standard, every coating machine has a filling device for filling chocolate into chocolate moulds. The very good insulation of the machine minimizes heat loss. The removable chocolate tank is equipped with a drain cock for easy cleaning of the machine, changing chocolate, and removal of the tanks for a thorough cleaning.
120mm enrober with 1m take-off-table and paper roll
With paper roll, the perfect addition to every cooling machine.
mini molding machine
The mini molding machine is a smaller table model with a capacity of about 15 kg of chocolate - an ideal molding machine for chocolate, bars, hollow figures, hardening and for daily use in pastry shops and bakeries. Even here, you can remove the reservoir and adjust the chocolate output by changing the speed of the chocolate wheel. The machine is equipped with a beautiful body that can be closed completely. Vibration Table is a great addition.
Capacity: 15 kg / Dimensions: L 780 mm x W 560 mm x H 730 mm / weight 47 kg.
Mini Cutter: Ideal for traveling (show) pastry chefs who don't want to do without their equipment, it's also suitable for small spaces. The device is only 180 x 180 mm. The base is made of anodized aluminium;
All other parts are made of stainless steel.
Various options are available upon request.
Mini-Praline Cutter 7.5mm:
Cutter base Mini-Praline 180 x 180 mm
Cutting frame 15 mm
Cutting frame 22.5 mm
Cutting frame 30 mm
Cutting frame 37.5 mm
Cutter Mini-Praline 5 mm:
Cutter base Mini-Praline
180 x 180 mm
Cutting frame 10 mm
Cutting frame 15 mm
Cutting frame 20 mm
Cutting frame 25 mm
Mini sheet for casting 180x180x10 (12/13/15)
Mini-foil for casting on a sheet
Mini molding frames 180 x 180 x 10 (5.6.15) mm
Mini Coat-Nougat-Frames set 8 frames, 1 scraper + 1 stainless steel plate on the inside: 180 mm x 180 mm
We always do our best for our customers. Their satisfaction is the guarantee of the quality of our products. Therefore, we support the client at all stages, from choosing the most suitable machine, guaranteeing all the necessary spare parts and consumables and providing our constant telephone and local assistance, at any time and in the shortest possible time.
The manufacturer undertakes to repair or replace all defective parts within 12 months from the date of start-up of the equipment, with the exception of electrical, electronic and parts subject to normal wear and tear. The equipment is voided from the warranty if it is not used for its intended purpose. In the event of a repair or replacement, all costs for transport, accommodation of the manufacturer's technician/s are paid by the buyer.
Installation is optional, not included in the price. Shipping time is approximately 15 days.
Note: The price does not include packaging.
Price from the factory EXW: from 15.500,00 EUR