Complete line of corn chips

I offer you a new line for the production of corn thin chips 25.200 pcs / h. On such equipment it is possible to produce air thin chips from 2 mm and above. With a cycle time of 8 seconds, one grain processor can produce up to 12,600 chips per hour (45 mm diameter). The minimum thickness depends on the ingredient, but the thinnest will be +-2mm.
€225,592.00

I offer you a new line for the production of corn thin chips 25.200 pcs / h. On such equipment it is possible to produce air thin chips from 2 mm and above. With a cycle time of 8 seconds, one grain processor can produce up to 12,600 chips per hour (45 mm diameter). The minimum thickness depends on the ingredient, but the thinnest will be +-2mm.

With some ingredients, we can go lower, but the question is whether you have a strong enough product so that it does not crumble later in the package. The thickness is adjustable, depending on the setting of the equipment. After the chips are made, they pass through an IR drum for drying and sterilization. It will be very tasty for buyers to add natural spices and oils. Mix them in a dragee drum and then pack them completely to keep their crunchy properties. The secret to success in the chips business lies in the original recipe and packaging. Packaging can be very different, including paper and film. The grain processor is supplied separately, as well as the entire line (from the hopper for mixing and soaking grain to the packer).

This is a budget Belgian equipment for the production of chips 28 pcs. every 8 sec. or 1.260 packs per hour. The company produces a fully automated press for the production of cereal chips, the matrix goes immediately to 28 molds. We supply the entire line from production to its storage on a pallet, finished products. Specially designed equipment is suitable for the production of whole grain crisps from white, black, wild rice, corn, wheat, wheat pellet, potato pellet, corn pellet, sweet potato pellet, barley, millet, kamut, buckwheat, oats, grain mixtures and gelatinized granules.

Ingredients are fed through a funnel, dosed by volume and introduced using a loading tray into a heated form. The processor then puts pressure on the ingredients for a short time. This pressure allows the moisture in the ingredient to be converted to steam, causing expansion or bursting. The mold opens slightly to allow the ingredients to expand and form the product. Finished products are ejected onto a conveyor that leads them to a cleaning drum to remove unopened ingredients and fine particles, and then on to flavors and packaging.

Line composition:

1. mixer for mixing different or homogeneous wet grains 65 kg, 1 pc. - $4.900,00
2. grain processors, price of each EXW: 54.882,00 EUR x 3 pcs. = 164.646,00 EUR
3. conveyor for five grain processors, EXW price: 15.021,00 EUR x 1 pc.
4. IR drum for drying chips, EXW price: 45.928,00 EUR x 1 pc.
5. double dragging drum for adding oil and dry spices, complete with oil station, 1 pc. - $10.000,00
6. Packing station with multi-head included, 1 pc. on request

Technical specifications:

Fixed product size: diameter 45 mm x thickness from 2 to 5 mm.
Production speed of 12.600 chips per hour on one grain processor,
Heater temperature: max: Max: +400 C, min: +1 C.
Press control type: hydraulic microcontroller,
Electric power: 5 kW/h,
Power supply: 1 phase 220V, 50/60Hz
Dimensions: 575x510x1490 mm (LxWxH)
Weight: 185 kg
 
Guarantee:

The manufacturer undertakes to repair or replace all defective parts within 12 months from the date of start-up of the equipment, with the exception of electrical, electronic and parts subject to normal wear and tear. The equipment is voided from the warranty if it is not used for its intended purpose. In the event of a repair or replacement, all costs for transport, accommodation of the manufacturer's technician/s are paid by the buyer.

Installation is optional, not included in the price. Shipping time is approximately 20 days.

Note: The price includes packaging in a film and a wooden box. When shipped to the buyer, the manufacturer does not pour hydraulic oil into the equipment, for the convenience of customs clearance. Also, the manufacturer, complete with the equipment, puts all the necessary spare parts and tools for maintenance and care of the equipment.

Manufacturer: Belgium

Factory price EXW: 225.595,00 EUR