Caramel production line

We offer you new Indian equipment designed for the production of hard caramel of various elongated or twisted shapes. Forming type - automatic. The productivity of the kit depends on the technologist and personnel, on average it is 60 kg/hour. The dimensions of the product are specified when ordering.

We offer you new Indian equipment designed for the production of hard caramel of various elongated or twisted shapes. Forming type - automatic. The productivity of the kit depends on the technologist and personnel, on average it is 60 kg/hour. The dimensions of the product are specified when ordering.

Technical description of caramel preparation department:

1. Vacuum cooker stainless steel (electric heating)
Productivity 25-30 kg/batch in 25 min.
304 stainless steel contact parts
Anchor agitator
Water cooled vacuum tank
Liquid ring vacuum pump with 5 HP AC motor.
2 hp engine with AC drive for agitator
Electric heaters 6000 W X 2 = 12 kW
Control panel with on/off for 5HP AC motors. pump, vacuum motor stop timer, circuit breaker, ammeter, voltmeter and digital temperature controller with display for heaters and other standard electrical
-------------------------------------------------- --------
Factory price FOB: $7.750,00

2. Cooling table with water circulation
Capacity 25-40 kg
Top coat SS304
Cooling zone - 4 x 2 feet
Provided water circulating cooling
-------------------------------------------------- --------
Factory price FOB: $2.250,00

3. Pulling machine
Capacity 25 kg. The consignment
Teflon rods
Side rail covers made of stainless steel
Stainless steel lock washer
MS Gears
2 HP AC motor
Electric starter
Additional function
Optional: safety guards with safety switches - $625,00
-------------------------------------------------- -------
Factory price FOB: $3.125,00

Technical description of the molding department:

4. Batch former, capacity of 50 kg
Stainless steel rollers
Machine top SS304
Reverse and forward electrical system
motorized lift
Stainless steel / gunmetal contact parts
0.5 HP AC motor (for revs/forward)
1 HP, AC motor for lifting
Heater 1000 W for intermittent heating
-------------------------------------------------- ------
Factory price FOB: $4.500,00

5. Rope sizer five stage
304 stainless steel gauge wheel
304 stainless steel caramel rope guides, exit plates, etc.
2 HP AC motor
-------------------------------------------------- ------
Factory price FOB: $5.000,00

6. Rope twisting conveyors for caramel
Two sets of cross conveyors for twisting the rope
Single rope cutter
Cross conveyors with PVC food belt.
One gear box for rope cutting
One AC drive for cross conveyors
One AC drive for wire cutter
Electrical panel with standard electrical
-------------------------------------------------- ------
Factory price FOB: $9.750,00

7. Electrical control panel (DPB)
Single line control cabinet
Standard electrical equipment
Voltmeter, ammeter
Button control, timer for batch shaper
MCB, indicator lamp, etc.
2 HP AC drive for candy rope calibrator
-------------------------------------------------- ------
Factory price FOB: $3.125,00

The Quoted price is FOB Ludhiana, Punjab, India Dry Port: wooden packing for Each machine in different boxes will cost $900. 
Total Weight of the machines will be 4100-4500 kg.

Transport: at the expense of the buyer. Delivery is possible by agreement to any non-sanctioned country in the world.

Packing: at the request of the buyer, for a separate payment, packing in a wooden box is possible +$900.

48”X 44”X89” - Stainless steel vacuum cooker  
39”X 17”X25”  - Pump & motor of vacuum cooker 
25”X 20”X40” - Electric panel of cooker 
58”X34”X14” - Cooling table 
95”X 33”X62” - Batch former 
48”X 28”X60” - Rope sizer 
41”X 41”X53” - Pulling machine
72”X 49”X67” - Rope twisting conveyors 
36”X30”X70” - Electric control panel

Warranty: The warranty period for new equipment is 12 months for mechanical parts.

Checking of electronic components is carried out by technical staff at our company's office in India. The costs associated with technical inspection, functional testing, transport and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.

Repair or replacement of machine parts with non-original spare parts will void any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” of the machine or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.

The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the customer must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.

The following situations are not covered by the warranty:

Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or tampering with the machine that does not comply with the manual mentioned above should be considered incorrect and inappropriate.

VAT: not included

Commissioning: not included. The cost of installation and commissioning of the machine, performed by technical staff, is $450.00 per day, plus transportation and lodging.

Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.

Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving potential claims is the Court of India.

Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.

Manufacturer: India

Factory price FOB: $35.500,00